5
P-660RU-T v2 Quick Start Guide
After you’ve made the connections, push in the power button
to turn on the P-660RU-T v2. Look at the lights on the front
panel.
• The
POWER
light blinks while performing system testing. It
then turns steady on if the testing is successful.
• The
DSL
light blinks then turns steady on, and blinks when
there is traffic.
• The
USB
light turns on if the USB port is properly connected,
and blinks when there is traffic.
V
If none of the LEDs are on, unplug the device
and recheck your hardware connections.
Install the USB Software
Follow the steps below to install the USB driver.
1
Save your work and close all applications.
2
Connect the P-660RU-T v2 to a USB port on your
computer. A
Found New Hardware Wizard
screen
displays.
