P-660R-Tx v3 Series Support Notes
41
All contents copyright © 2008 ZyXEL Communications Corporation.
Key Settings:
Field
Options
Description
Numbers of IPs
Multiple
When you select this option you can select
Address Mapping Set Number 1~8 in the
pull-down menu in
Virtual Circuit
.
Single
When you select this option, this remote node
will use default SUA Address Mapping Set.
You can see it in CLI by command „
ip nat
lookup 255
‟. It‟s a read-only sets with two
rules:
Many-to-One
and
server
mapping.
Select
Full Feature
when you require other
mapping types.
Configuring NAT
Address Mapping Sets and NAT Server Sets
The P-660R-Tx v3 has 8 remote nodes and so allows you to configure 8 NAT
Address Mapping Sets, You must specify which NAT Address Mapping Set
(1~8) to use in the remote node when you select
Multiple IPs.
You can edit 8
rules for each Address Mapping Set.
The NAT Server Set is a list of LAN side servers mapped to external ports. We
can configure it in Web Configurator, Advanced Setup,
Advanced Setup ->
NAT -> IP Address Mapping.
To use the NAT server sets
you‟ve configured, a
Server
rule must be set up inside the NAT Address Mapping set. Please see
NAT Server Sets for further information on how to apply it.
Here we‟ll guide you to configure Address Mapping Sets from
Web
Configurator
and
CLI
.
Now let's begin with Web Configurator:
Firstly let‟s come to Web Configurator, Advanced Setup,
Advanced Setup ->
NAT -> IP Address Mapping:
