P-660R-Tx Series Support Note s
Key Settings:
Field
Options
Description
Numbers of IPs
Multiple
When you select this option you can select
Address Mapping Set Number 1~8 in the
pull-down menu in
Virtual Circuit
.
Single
When you select this option, this remote node
will use default SUA Address Mapping Set. You
can see it in CLI by command
„
ip nat lookup
255
‟
. It
‟
s a read-only sets with two rules:
Many-to-One
and
server
mapping. Select
Full
Feature
when you require other mapping
types.
Configuring NAT
Address Mapping Sets and NAT Server Sets
The P-660R-Tx has 8 remote nodes and so allows you to configure 8 NAT
Address Mapping Sets, You must specify which NAT Address Mapping Set (1~8)
to use in the remote node when you select
Multiple IPs.
You can edit 8 rules for
each Address Mapping Set.
The NAT Server Set is a list of LAN side servers mapped to external ports. We
can configure it in Web Configurator, Advanced Setup,
Advanced Setup ->
NAT
-> IP Address Mapping.
To use the NAT server sets you
’
ve configured, a
Server
rule must be set up inside the NAT Address Mapping set. Please see NAT Server
Sets for further information on how to apply it.
Here we
‟
ll guide you to configure Address Mapping Sets from
Web
Configurator
and
CLI
.
Now let's begin with Web Configurator:
Firstly let
‟
s come to Web Configurator, Advanced Setup,
Advanced Setup ->
NAT -> IP Address Mapping:
39
All contents copyright © 2010 ZyXEL Communications Corporation.
