ZyXEL Communications P-660R-F1 series, User Manual

Page: 166 / 268

Chapter 13 Remote Management Configuration
P-660R-F1 Series User’s Guide
166
The following table describes the labels in this screen.
LABEL DESCRIPTION
Port You may change the server port number for a service if needed, however you
must use the same port number in order to use that service for remote
management.
LAN Access
Status Select Enable to use the LANinterface for Access Status. When Access Status is
enabled on the LAN interface, this is the interface(s) through which a computer
may access the ZyXEL Device using this service. Select
Disable to discontinue
Access Status on the LAN interface.
LAN Access
Authentication Select Enable to enforce authentication for access on the LAN interface. Access
Status must first be enabled on the LAN interface to use authentication. Select
Disable to discontinue authentication for access on the LAN interface.
WAN Access
Status Select Enable to use the WANinterface for Access Status. When Access Status is
enabled on the WAN interface, this is the interface(s) through which a computer
may access the ZyXEL Device using this service.Select
Disable to discontinue
Access Status on the WAN interface.
Secured Client IP A secured client is a “trusted” computer that is allowed to communicate with the
ZyXEL Device using this service.
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify
to access the ZyXEL Device using this service.
HTTPS
Server Host Key Select the Server Host Key that the ZyXEL Device will use to identify itself. The
ZyXEL Device is the SSL server and must always authenticate itself to the SSL
client (the computer which requests the HTTPS connection with the ZyXEL
Device).
Authenticate
Client Certificates Select Authenticate Client Certificates (optional) to require the SSL client to
authenticate itself with the ZyXEL Device by sending the ZyXEL Device a
certificate. To do that the SSL client must have a CA-signed certificate from a CA
that has been imported as a trusted CA on the ZyXEL Device.
Port You may change the server port number for a service if needed, however you
must use the same port number in order to use that service for remote
management.
Access Status Select the interface(s) through which a computer may access the ZyXEL Device
using this service.
Secured Client IP A secured client is a “trusted” computer that is allowed to communicate with the
ZyXEL Device using this service.
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify
to access the ZyXEL Device using this service.
Apply Click Apply to save your settings back to the ZyXEL Device.
Cancel Click Cancel to begin configuring this screen afresh.