P-660HW-Tx v3 Series Support Notes
75
All contents copyright © 2008 ZyXEL Communications Corporation.
wan callsch oncedate
2005 12 27
(Set the schedule used just once, it works on 2005-12-27)
wan callsch starttime
12 00
(Set the schedule start time as 12:00)
wan callsch duration
16 00
(Set schedule duration time as 16 hours)
wan callsch action
2
(Set action as dial-on-demand)
wan callsch save
(Save the current call schedule set)
Key Settings:
Start Date
Start date of this schedule rule. It can be unmatched with weekday
setting. For example, if Start Date is 2000/10/02(Monday), but Monday
setting in weekday can be No.
Forced On
The node will always keep up during the setting period. It is equivalent
to diable the idel timeout.
Forced Down
The node will always keep doen during the setting period. The
connected remote node will be dropped.
Enable
Dial-On-Demand
The remote node accepts Dial-on-demand during this period.
Disable
Dial-On-Demand
The remote node denies any demand dial during the period. For the
existing connected nodes, it will be dropped after idle timeout and no
triggered up.
Start Time/
Duration
Start Time and Duration of this schedule
.
Apply the schedule to the Remote node
Multiple scheduling rules can program in a Remote node, and they have
priority. For example, if we program the sets as 1,2,3,4 in remote node, then
the set 1 will override set 2,3,4. set 2 will override 3,4, and so on.
We can apply the schedule to the remote node in
CLI
by the commands:
wan node index []index#]
wan node callsch [index#]
wan node save
For example, if we want to apply the call schedule set 1 to remote node 1, we
could use the commands:
wan node index
1
wan node callsch
1
wan node save
