P-660HW-Tx v2 Series Support Notes
•
Setup the P-660HW-Tx v2 as a DHCP Relay
We could set the P-660HW-Tx v2 as a DHCP Relay by the following command
in
CLI
:
Ip dhcp enif0 mode
relay
Ip dhcp enif0 relay server
[Server IP Address]
4. SUA Notes
Tested SUA/NAT Applications (e.g., Cu-SeeMe, ICQ, NetMeeting)
Introduction
Generally, SUA makes your LAN appear as a single machine to the outside
world. LAN users are invisible to outside users. However, some applications
such as Cu-SeeMe, and ICQ will need to connect to the local user behind the
P-660HW-Tx v2. In such case, a SUA server must be configured to forward the
incoming packets to the true destination behind SUA. After the required server
are configured in Web Configurator, Advanced Setup,
Network -> NAT ->
Port Forwarding,
the internal server or client applications can be accessed by
using the P-660HW-Tx v2's
WAN IP Address
.
SUA Supporting Table
The following are the required Web Configurator, Advanced Setup,
Network
-> NAT -> Port Forwarding
for the various applications running SUA mode.
ZyXEL SUA Supporting Table
1
Required Settings in
Port Forwarding
Port/IP
Application
Outgoing Connection
Incoming
Connection
HTTP None
80/client
IP
FTP None
21/client
IP
42
All contents copyright © 2006 ZyXEL Communications Corporation.