ZyXEL Communications P-660H Series, User Manual

Page: 58 / 466

P-660H/HW-T Series User’ Guide
57 Chapter 3 Wizard Setup for Internet Access
Figure 11 Internet Connection with ENET ENCAP
The following table describes the fields in this screen.
Back Click Back to go back to the first wizard screen.
Next Click Next to continue to the next wizard screen.
Table 8 Internet Connection with ENET ENCAP
LABEL DESCRIPTION
IP Address A static IP address is a fixed IP that your ISP gives you. A dynamic IP address is not
fixed; the ISP assigns you a different one each time you connect to the Internet.
Select
Obtain an IP Address Automatically if you have a dynamic IP address;
otherwise select Static IP Address and type your ISP assigned IP address in the IP
Address text box below.
Subnet Mask Enter a subnet mask in dotted decimal notation.
Refer to the appendices
to calculate a subnet mask If you are implementing subnetting.
ENET ENCAP
Gateway
You must specify a gateway IP address (supplied by your ISP) when you use ENET
ENCAP in the Encapsulation field in the previous screen.
Network
Address
Translation
Select None , SUA Only or Full Feature from the drop-sown list box. Refer to the NAT
chapter for more details.
Back Click Back to go back to the first wizard screen.
Next Click Next to continue to the next wizard screen.
Table 7 Internet Connection with RFC 1483 (continued)
LABEL DESCRIPTION