manualshive.com logo in svg

ZyXEL Communications P-2812HNU-51c, User Manual

Share
Download
ZyXEL Communications P-2812HNU-51c User Manual Download Page 307

P-2812HNU-51c User’s Guide

307

C

H A P T E R

 

 2 6  

Troubleshooting

This chapter offers some suggestions to solve problems you might encounter. The 
potential problems are divided into the following categories. 

•

Power, Hardware Connections, and LEDs

•

P-2812HNU-51c Access and Login

•

Internet Access

•

Phone Calls and VoIP

•

USB Device Connection

•

Wireless LAN Troubleshooting

26.1  Power, Hardware Connections, and LEDs

The P-2812HNU-51c does not turn on. None of the LEDs turn on.

1

Make sure the P-2812HNU-51c is turned on. 

2

Make sure you are using the power adaptor or cord included with the P-2812HNU-
51c.

3

Make sure the power adaptor or cord is connected to the P-2812HNU-51c and 
plugged in to an appropriate power source. Make sure the power source is turned 
on.

4

Turn the P-2812HNU-51c off and on. 

5

If the problem continues, contact the vendor.

One of the LEDs does not behave as expected.

Summary of Contents for P-2812HNU-51c


















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands