ZyXEL Confidential
340adq4c0
13/36
open
Open
ADSL
line
opencmd
Open ADSL line with specific standard
opmode
Show the operational mode
perfdata
Show performance information,CRC,FEC, error
seconds..
rdata
[start] [length]
Read DSP CTRLE registers 512 bytes
reset
Reset ADSL modem, and must reload the modem
code again
selftest
long
ADSL long loop test
short
ADSL short loop test
status
ADSL status (ex: up, down or wait for init)
version
ADSL version information
vendorid
ADSL vendor information
utopia
Show ADSL utopia information
cellcnt
Show ADSL cell counter
display
shutdown
Show
the
counter of rate adaptive mechanism
happening
rateup
Show real status that rate adaptive mechanism
happened
rateadap
[on|off]
Turn on/off rate adaptive mechanism
dumpcondition
[on|off]
Turn on/off online debug information of rate
adaptive mechanism
sampletime
[mins]
Tune the sample time of rate adaptive mechanism
noisegt
[dB]
if noise margin is 3db greater than before, and
rate is worse than before, then system will do “L1
shutdown RA3”, default is 3db
noisemargin
[dB]
if noise margin is greater than this value, and rate
is worse than before, then system will do “L1
shutdown RA3”, default is 8db
persisttime
[time]
when the adaptive condition is matched system
will continue to monitor the time period
“persisttime” before doing “L1 shutdown RA3”,
default is 30 seconds
timeinterval
[mins]
when “L1 shutdown RA3” is done twice, and still
can’t reach the max rate which system recorded,
it will delay a time period that the period base
time is”timeinterval” before starting again. The
time-based default is 2 hrs
defectcheck
[on|off]
Turn on/off detect table checking, default is on
txgain
[value]
Set the CTRLE register (0xc3), the value is from
0xfa to 0x06
targetnoise
[value]
Set the CTRLE register (0xc4), the value is from
0xfa to 0x06
maxtonelimit
[value]
Set the CTRLE register (0xc5), the value is from
0xfa to 0x06
rxgain
[value]
Set the CTRLE register (0xc6), the value is from
0xfa to 0x06
txoutputpwr
[value]
Set the CTRLE register (0xc7), the value is from
0xfa to 0x06
rxoutputpwr
[value]
Set the CTRLE register (0xc8), the value is from
0xfa to 0x06
maxoutputpwr
[value]
Set the CTRLE register (0xc9), the value is from
