manualshive.com logo in svg

ZyXEL Communications P-2304R, User Manual

Share
Download
ZyXEL Communications P-2304R User Manual Download Page 95

 Chapter 7 LAN

P-2304R-P1 Series User’s Guide

95

7.2.6  LAN Advanced Screen

Use this screen to add subnets on the LAN port. You can also control what routing information 
is sent and received by each subnet. To access this screen, click 

Network > LAN > 

Advanced

.

Figure 46   

Network > LAN > Advanced

Each field is described in the following table.

RIP Version

Select which version of RIP the ZyXEL Device uses when it sends or receives 

information on the subnet.

RIP-1

 - The ZyXEL Device uses RIPv1 to exchange routing information.

RIP-2B

 - The ZyXEL Device broadcasts RIPv2 to exchange routing information.

RIP-2M

 - The ZyXEL Device multicasts RIPv2 to exchange routing information.

Apply

Click this to save your changes and to apply them to the ZyXEL Device.

Reset

Click this to set every field in this screen to its last-saved value.

Table 39   

Network > LAN > IP Alias

LABEL

DESCRIPTION

Table 40   

Network > LAN > Advanced

LABEL

DESCRIPTION

RIP & Multicast 

Setup

RIP Direction

Use this field to control how much routing information the ZyXEL Device sends 

and receives on the subnet.

None

 - The ZyXEL Device does not send or receive routing information on the 

subnet.

Both

 - The ZyXEL Device sends and receives routing information on the subnet.

In Only

 - The ZyXEL Device only receives routing information on the subnet.

Out Only

 - The ZyXEL Device only sends routing information on the subnet.

RIP Version

Select which version of RIP the ZyXEL Device uses when it sends or receives 

information on the subnet.

RIP-1

 - The ZyXEL Device uses RIPv1 to exchange routing information.

RIP-2B

 - The ZyXEL Device broadcasts RIPv2 to exchange routing information.

RIP-2M

 - The ZyXEL Device multicasts RIPv2 to exchange routing information.

Summary of Contents for P-2304R













































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands