manualshive.com logo in svg

ZyXEL Communications NWA1123-ACv2, User Manual

Share
Download
ZyXEL Communications NWA1123-ACv2 User Manual Download Page 49

NWA1123-ACv2 User’s Guide

49

C

H A P T E R

      5

Network

5.1  Overview

This chapter describes how you can configure the management IP address and VLAN settings of 
your NWA.

The Internet Protocol (IP) address identifies a device on a network. Every networking device 
(including computers, servers, routers, printers, etc.) needs an IP address to communicate across 
the network. These networking devices are also known as hosts.

Figure 26   

IP Setup

The figure above illustrates one possible setup of your NWA. The gateway IP address is 192.168.1.1 
and the managed IP address of the NWA is 192.168.1.2 (default), but if the NWA is assigned an IP 
address by a DHCP server, the default (192.168.1.2) will not be used. The gateway and the NWA 
must belong in the same IP subnet to be able to communicate with each other.

5.1.1  What You Can Do in this Chapter

• The 

IP Setting 

screen (

Section 5.2 on page 49

) configures the NWA’s LAN IP address. 

• The 

VLAN 

screen (

Section 5.3 on page 51

) configures the NWA’s VLAN settings. 

5.2  IP Setting 

Use this screen to configure the IP address for your NWA. To access this screen, click 

Configuration > Network > IP Setting

.

Summary of Contents for NWA1123-ACv2



























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands