![ZyXEL Communications NWA1123-ACv2 User Manual Download Page 51](http://html1.mh-extra.com/html/zyxel-communications/nwa1123-acv2/nwa1123-acv2_user-manual_945928051.webp)
Chapter 5 Network
NWA1123-ACv2 User’s Guide
51
5.3 VLAN
This section discusses how to configure the NWA’s VLAN settings.
Figure 28
Management VLAN Setup
In the figure above, to access and manage the NWA from computer
A
, the NWA and switch
B
’s
ports to which computer
A
and the NWA are connected should be in the same VLAN.
A Virtual Local Area Network (VLAN) allows a physical network to be partitioned into multiple logical
networks. Devices on a logical network belong to one group. A device can belong to more than one
IPv6 Address/
Prefix Length
Enter the IPv6 address and the prefix length for the LAN interface if you want to use a
static IP address. This field is optional.
The prefix length indicates what the left-most part of the IP address is the same for all
computers in the network, that is, the network address.
Gateway
Enter the IPv6 address of the default outgoing gateway using colon (:) hexadecimal
notation.
Metric
Enter the priority of the gateway (if any) on the LAN interface. The NWA decides which
gateway to use based on this priority. The lower the number, the higher the priority. If
two or more gateways have the same priority, the NWA uses the one that was
configured first.
DHCPv6 Client
Select this option to set the NWA to act as a DHCPv6 client.
DUID
This field displays the DHCP Unique IDentifier (DUID) of the NWA, which is unique and
used for identification purposes when the NWA is exchanging DHCPv6 messages with
others. See
for more information.
Request Address
Select this option to get an IPv6 address from the DHCPv6 server.
DHCPv6 Request
Options
Select this option to determine what additional information to get from the DHCPv6
server.
DNS Server
Select this option to obtain the IP address of the DNS server.
NTP Server
Select this option to obtain the IP address of the NTP server.
Apply
Click
Apply
to save your changes back to the NWA.
Reset
Click
Reset
to return the screen to its last-saved settings.
Table 22
Configuration > Network > IP Setting (continued)
LABEL
DESCRIPTION
A
B
Summary of Contents for NWA1123-ACv2
Page 10: ...10 PART I User s Guide...
Page 29: ...29 PART II Technical Reference...
Page 55: ...Chapter 6 Wireless NWA1123 ACv2 User s Guide 55 Figure 31 Configuration Wireless AP Management...
Page 210: ...Appendix D Legal Information NWA1123 ACv2 User s Guide 210 Environmental Product Declaration...