manualshive.com logo in svg

ZyXEL Communications NWA 1121-NI -, User Manual

Share
Download
ZyXEL Communications NWA 1121-NI - User Manual Download Page 127

NWA1121-NI User’s Guide

127

C

H A P T E R

      1 2

Troubleshooting

This chapter offers some suggestions to solve problems you might encounter. The potential 
problems are divided into the following categories.

•

Power, Hardware Connections, and LEDs

•

NWA1121-NI Access and Login

•

Internet Access

12.1  Power, Hardware Connections, and LEDs

The NWA1121-NI does not turn on. None of the LEDs turn on.

1

Make sure you are using the power adaptor or cord included with the NWA1121-NI.

2

Make sure the power adaptor or cord is connected to the NWA1121-NI and plugged in to an 
appropriate power source. Make sure the power source is turned on.

3

Disconnect and re-connect the power adaptor or cord to the NWA1121-NI. 

4

If the problem continues, contact the vendor.

One of the LEDs does not behave as expected.

1

Make sure you understand the normal behavior of the LED. See 

Section 1.7 on page 17

.

2

Check the hardware connections. See the Quick Start Guide.

3

Inspect your cables for damage. Contact the vendor to replace any damaged cables.

4

Disconnect and re-connect the power adaptor to the NWA1121-NI. 

5

If the problem continues, contact the vendor.

Summary of Contents for NWA 1121-NI -















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands