ZyXEL Communications NSA series, User Manual

Page: 173 / 358

Chapter 8 Network
Media Server User’s Guide
173
Click Network > PPPoE in the navigation panel to open the following screen.
Figure 69
Network > PPPoE
The following table describes the labels in this screen.
8.7 Telnet Screen
Use this screen to enable or disable Telnet access to the NSA. Telnet is available in the NSA310S,
NSA320S, NSA325, and NSA325 v2.
Table 33
Network > PPPoE
LABEL DESCRIPTION
Status
Status This field displays the status of PPPoE connection.
IP Address This field displays the IP address of your PPPoE connection.
IP Subnet Mask This field displays the IP subnet mask of your PPPoE connection.
Configuration
Enable PPPoE
Connection Select this option to establish a direct Internet connection for the NSA. You need to enter
the username and password as given by your ISP.
Username Enter the username exactly as your ISP assigned. If assigned a name in the form
user@domain where domain identifies a service name, then enter both components
exactly as given.
Password Enter the password associated with the username above.
Password
(Confirm)
Retype the password for confirmation.
Apply Click this to save your changes.
Reset Click this to restore previously saved settings.