ZyXEL Communications NPS-520, Quick Start Manual

Page: 10 / 115

ENGLISH
9
If you selected DHCP in the previous screen but there was
no DHCP server found in your network, the following screen
displays. Click
Yes to go back to the TCP/IP configuration
screen or click No to have the NPS-520 search for the DHCP
server again.
If your computer and the NPS-520 are not in the same
subnet, the following screen pops up. Click
OK (or Yes ) to
continue.
10 This read-only screen shows the current settings. Check
whether what you have configured is correct and click