ZyXEL Communications NBG-510S Page 38 User Manual Download

Page: 38 / 210

Chapter 3 The Web Configurator

NBG-510S User’s Guide

In the

Old Password

field, enter the current password. Enter the new password (up to 31

printable ASCII characters with no spaces allowed) in the

New Password

and the

Re-type to

Confirm

fields. Click

to save the changes.

3.6 Device Reset

You can reset the ZyXEL Device

using the

RESET

button. You need to reset your ZyXEL

Device to the factory default settings if

• you have changed the default administrator login password and have now forgotten it.

• you want to start configuring the ZyXEL Device again from the default settings.

Resetting your device back to the defaults erases all your custom settings.

Follow the steps below to reset the ZyXEL Device using the

RESET

button panel.

Make sure the

PWR

LED is on and not blinking.

Use a pointed object to press the

RESET

button in for five seconds and release it. The

device restarts with the factory default settings (the default LAN IP address is

192.168.1.1

and the administrator login password is

1234

Wait until the device finished rebooting before accessing the web configurator again.

Summary of Contents for NBG-510S



















































































































































































































Search results

Summary of Contents for NBG-510S

Reviews:

Related manuals for NBG-510S

Brands by name

Popular brands

ZyXEL Communications NBG-510S, User Manual

Search results

Summary of Contents for NBG-510S

Reviews:

Related manuals for NBG-510S

Brands by name

Popular brands