manualshive.com logo in svg

ZyXEL Communications NBG-510S, User Manual

Share
Download
ZyXEL Communications NBG-510S User Manual Download Page 197

 Appendix D Legal Information

NBG-510S User’s Guide

197

ZyXEL Limited Warranty

ZyXEL warrants to the original end user (purchaser) that this product is free from any defects 
in materials or workmanship for a period of up to two years from the date of purchase. During 
the warranty period, and upon proof of purchase, should the product have indications of failure 
due to faulty workmanship and/or materials, ZyXEL will, at its discretion, repair or replace the 
defective products or components without charge for either parts or labor, and to whatever 
extent it shall deem necessary to restore the product or components to proper operating 
condition. Any replacement will consist of a new or re-manufactured functionally equivalent 
product of equal or higher value, and will be solely at the discretion of ZyXEL. This warranty 
shall not apply if the product has been modified, misused, tampered with, damaged by an act 
of God, or subjected to abnormal working conditions.

Note

Repair or replacement, as provided under this warranty, is the exclusive remedy of the 
purchaser. This warranty is in lieu of all other warranties, express or implied, including any 
implied warranty of merchantability or fitness for a particular use or purpose. ZyXEL shall in 
no event be held liable for indirect or consequential damages of any kind to the purchaser.
To obtain the services of this warranty, contact ZyXEL's Service Center for your Return 
Material Authorization number (RMA). Products must be returned Postage Prepaid. It is 
recommended that the unit be insured when shipped. Any returned products without proof of 
purchase or those with an out-dated warranty will be repaired or replaced (at the discretion of 
ZyXEL) and the customer will be billed for parts and labor. All repaired or replaced products 
will be shipped by ZyXEL to the corresponding return address, Postage Paid. This warranty 
gives you specific legal rights, and you may also have other rights that vary from country to 
country.

Registration

Register your product online to receive e-mail notices of firmware upgrades and information 
at www.zyxel.com for global products, or at www.us.zyxel.com for North American products.

Summary of Contents for NBG-510S



















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands