LTE3316 Series User’s Guide
137
C
HAPTER
21
MGMT Interface
21.1 Overview
This chapter explains how to configure the Zyxel Device remote management. Remote Management
allows you to manage your Zyxel Device from a remote location.
21.2 What You Can Do
• Use the
Local MGMT
screen to configure settings for HTTP or HTTPS access to the Zyxel Device and how
to login and access user screens look (
).
• Use the
Remote Management
screen to through which interface(s) users can use which service(s) to
manage the Zyxel Device (
).
21.3 What You Need To Know
Remote management over LAN or WAN will not work when:
1
The IP address in the Secured Client IP Address field (
) does not match the
client IP address. If it does not match, the Zyxel Device will disconnect the session immediately.
2
There is already another remote management session. You may only have one remote management
session running at one time.
3
There is a firewall rule that blocks it.
21.3.1 System Timeout
There is a default system management idle timeout of five minutes (three hundred seconds). The Zyxel
Device automatically logs you out if the management session remains idle for longer than this timeout
period. The management session does not time out when a statistics screen is polling. You can change
the timeout period in the
Maintenance > General
screen.
21.4 Local MGMT
To change your Zyxel Device’s remote management settings, click
Configuration > Management >
MGMT Interface
to open the
Local MGMT
screen.
Summary of Contents for LTE3316-M604
Page 12: ...12 PART I User s Guide...
Page 40: ...40 PART II Technical Reference...
