LTE3301-M209 User’s Guide
98
C
HAPTER
12
Routing
12.1 Overview
This chapter shows you how to configure static routes for your Zyxel Device.
The Zyxel Device usually uses the default gateway to route outbound traffic from computers on the LAN
to the Internet. To have the Zyxel Device send data to devices not reachable through the default
gateway, use static routes.
For example, the next figure shows a computer (
A
) connected to the Zyxel Device’s LAN interface. The
Zyxel Device routes most traffic from
A
to the Internet through the Zyxel Device’s default gateway (
R1
).
You create one static route to connect to services offered by your ISP behind router
R2
. You create
another static route to communicate with a separate network behind a router
R3
connected to the
LAN.
Figure 65
Example of Static Routing Topology
12.2 What You Can Do
• Use the
Static Route
screen to view or configure information for a static route (
).
• Use the
Dynamic Routing
screen to enable and configure RIP on the Zyxel Device (