Chapter 6 WAN
LTE3301-M209 User’s Guide
61
6.6 IPv6 Screen
Use this screen to configure the Zyxel Device’s IPv6 settings. Click
Network
>
WAN > IPv6
from the
Configuration
menu.
Figure 35
Network > WAN > IPv6
The following table describes the labels in this screen.
Table 18 Network > WAN > IPv6
LABEL
DESCRIPTION
IPv6
Select
Enable
to allow the Zyxel Device to run IPv6. Otherwise, select
Disable
.
IPv6 Connection
Select
DHCPv6
if you want to obtain an IPv6 address from a DHCPv6 server.
DNS Setting
Select
Obtain DNS Server address Automatically
to have the Zyxel Device get the IPv6
DNS server addresses from the ISP automatically.
Select
Use the following DNS address
to have the Zyxel Device use the IPv6 DNS server
addresses you configure manually.
Primary DNS Address
Enter the first IPv6 DNS server address assigned by the ISP.
Secondary DNS
Address
Enter the second IPv6 DNS server address assigned by the ISP.
LAN IPv6 Address
Enter the IPv6 address for the Zyxel Device LAN interface in this field.
LAN IPv6 Link-Local
Address
This shows the IPv6 Link-local address in the LAN side. This is used by Zyxel Device when
communicating with neighboring devices on the same link. It allows IPv6-capable
devices to communicate with each other in the LAN side.
Autoconfiguraton
Click
Enable
if you want the devices on your local area network to obtain network
address that are not managed by a DHCPv6 server. Otherwise, select
Disable
.
Autoconfiguration Type Select
Stateless
if you want the Zyxel Device interface to automatically generate a link-
local address via stateless autoconfiguration.
Select
Stateful (DHCPv6)
when the devices connected to your LAN needs to have their
TCP/IP configuration set to DHCPv6 or obtain an IPv6 address automatically.