ZyXEL Communications LTE3202-M430, User Manual, Page: 79 / 117

LTE3202-M430 User’s Guide
79
C
HAPTER
12
Remote Management
12.1 Overview
Use the Remote Management screens to configure the LTE3202-M430’s web interface port, TR-069 auto-
configuration settings and activate UPnP. Additionally you can set up different bandwidth
management profiles that provide a convenient way to manage the LTE3202-M430’s network.
12.1.1 What You Can Do in this Chapter
• Use the Web interface screen to modify the server port for the HTTPS service ( Section 12.2 on page 79 ).
• Use the TR069 screen to configure the LTE3202-M430 to be managed by an ACS ( Section 12.3 on
page 80 ).
• Use the Telnet screen to enable Telnet in the LTE3202-M430 LAN/WAN interfaces ( Section 12.4 on
page 81 ).
• Use the UPnP screen to enable UPnP on the LTE3202-M430 ( Section 12.5 on page 82 ).
• Use the Bandwidth Management screen to configure bandwidth management profiles ( Section 12.6
on page 83 ).
12.2 The Web Interface Screen
Use the Web interface screen to change the LTE3202-M430’s WAN interface remote management
settings. Click Configuration > Remote Management > Web interface to open the following screen.
Figure 55 Configuration > Remote Management > Web interface
The following table describes the labels on this screen.
Table 37 Configuration > Remote Management >
LABEL DESCRIPTION
Web interface
Https port You may change the server port number for a HTTPS service if needed. However you
must use the same port number in order to use that service for remote
management.