- 4 -
3.4.
Installing a HL-11G
λ
Remove the HL-11G module from its protective packaging.
λ
Avoiding Electrostatic Discharge
Before you install the HL-11G module, ground yourself by touching a
piece of metal to avoid electrostatic discharge (ESD). You should also
take the following precautions to prevent damage to the HL-11G
module:
λ
Keep the HL-11G module in its antistatic-shielded bag until you
are ready to install it.
λ
Handle the HL-11G module by its edges.
λ
Ensure the connector is connected to above Model’s board tightly.
