ZyXEL Communications ES-315 User Manual Download Page 95

Page: 95 / 166

Chapter 15 Maintenance

ES-315/ES-315-F User’s Guide

Click

again and then wait for the Switch to restart. This takes up to two minutes.

This does not affect the Switch’s configuration.

15.5 Firmware Upgrade

Make sure you have downloaded (and unzipped) the correct model firmware and version to
your computer before uploading to the device.

Be sure to upload firmware for the correct model as uploading firmware for the
wrong model may damage your device.

From the

Maintenance

screen, click

Firmware Upgrade

. The following screen displays.

Figure 47

Firmware Upgrade

Type the path and file name of the firmware file you wish to upload to the Switch in the

File

Path

text box or click

Browse

to locate it. Click

Upgrade

to load the new firmware and reboot

the Switch. The following screen displays.

Figure 48

Firmware Upgrade Warning

After the firmware upgrade process is complete, see the

System Info

screen to verify your

current firmware version number. You may need to log in to the Switch again.

15.6 Restore a Configuration File

Restore a previously saved configuration from your computer to the Switch using the

Restore

Configuration

screen.

Summary of Contents for ES-315







































































































































































Search results

Summary of Contents for ES-315

Reviews:

Related manuals for ES-315

Brands by name

Popular brands

ZyXEL Communications ES-315, User Manual

Search results

Summary of Contents for ES-315

Reviews:

Related manuals for ES-315

Brands by name

Popular brands