ZyXEL Communications ES-2024A, User Manual

Page: 173 / 221

ES-2024A User’s Guide
172 Chapter 28 Command Examples
Figure 107 CLI: boot config Command Example
Use the
reload config
command to restart the system. The following figure shows an
example.
Figure 108 CLI: reload config Command Example
28.6.2 Resetting to the Factory Default
Follow the steps below to reset the switch back to the factory defaults.
1 Enter
erase running config
to reset the current running configuration.
2 Enter
write memory
to save the changes to the configuration file.
The following example resets the configuration file to the factory default settings.
Figure 109 CLI: Reset to the Factory Default Example
28.7 no Command Examples
These are the commonly used command examples that belong to the
no
group of commands.
28.7.1 no mirror-port
Syntax:
no mirror-port
Disables port mirroring on the switch.
An example is shown next.
ras# boot config
ras# reload config
ras# erase running-config
ras# write memory