ZyXEL Communications ES-2024A, User Manual

Page: 132 / 221

ES-2024A User’s Guide
Chapter 22 Access Control 131
22.10 Service Port Access Control
Service Access Control allows you to decide what services you may use to access the switch.
You may also change the default service port and configure “trusted computer(s)” for each
service in the
Remote Management screen (discussed later). Click Access Control to go
back to the main Access Control screen.
Figure 79 Access Control: Service Access Control
The following table describes the fields in this screen.
22.11 Remote Management
From the Access Control screen, display the Remote Management screen as shown next.
You can specify a group of one or more “trusted computers” from which an administrator may
use a service to manage the switch. Click
Access Control to return to the Access Control
screen.
Table 47 Access Control: Service Access Control
LABEL DESCRIPTION
Services Services you may use to access the switch are listed here.
Active Select this option for the corresponding services that you want to allow to access the
switch.
Service Port For Telnet, SSH, FTP, HTTP or HTTPS services, you may change the default service
port by typing the new port number in the Server Port field. If you change the default
port number then you will have to let people (who wish to use the service) know the new
port number for that service.
Timeout Type how many minutes a management session (via the web configurator) can be left
idle before the session times out. After it times out you have to log in with your
password again. Very long idle timeouts may have security risks. A value of "0" means
a management session never times out, no matter how long it has been left idle (not
recommended).
Apply Click Apply to save your changes back to the switch.
Cancel Click Cancel to begin configuring this screen afresh.