66
• The
ETHERNET
light turns on if the corresponding
ETHERNET
port
is properly connected and it blinks when there is traffic. If you do not
connect a computer correctly to any of these ports, the
ETHERNET
lights will not turn on.
• The
WLAN/WPS
light stays on and green when the wireless LAN is
ready.The light will not turn on if the wireless connection is not
activated. It is blue when WPS configured.
• The
WAN
light stays on if a physical Ethernet connection to the WAN
exists. It blinks when transmitting data.
• The
INTERNET
light is green when Internet access is available. It
blinks when transmitting data.
• The
PHONE
lights stay on when your SIP account is registered and
they blink if the receiver is off the hook.
• The
USB
light(s) turn on when there is a USB device (printer or
memory stick) or a 3G adapter connected to the EMG5324-D10A
and blinks when transmitting data.
If the
POWER
light does not turn on during start up, try turning the EMG5324-D10A
off, check the connections, wait a few seconds and then turn it back on. If the
problem persists, you may have a hardware problem and you need to contact your
vendor.
Internet Access Setup
If you have Internet access, the
WAN
and
INTERNET
lights will be on.
Open your web browser and go to http://www.zyxel.com. You may be
prompted to enter your username and password when attempting to
browse.
• If the
WAN
light is not on, try turning the EMG5324-D10A off, check
the connections, wait a few seconds and then turn it back on. If the
WAN
light is still not on, contact your service provider.
• If the
WAN
light is on, but the
INTERNET
light is off, you may need
to enter your Internet access configuration using the Web
Configurator - see page
