ZyXEL Communications, Inc.______________________________________________Prestige Application Notes
BRG00001: 6
Menu 11:
Menu 11 - Remote Node Profile
Rem Node Name= IPX_user Route= None
Active= Yes Bridge= Yes
Call Direction= Incoming
Edit PPP Options= No
Incoming: Rem IP Addr= N/A
Rem Login= username Edit IP/IPX/AppleTalk/Bridge= Yes
Rem Password= ******
Rem CLID= Telco Option:
Call Back= N/A Transfer Rate= 64K or 56K
Outgoing: Session Options:
My Login= Input Filter Sets=
My Password= Output Filter Sets=
Pri Phone #= N/A Call Filter Sets=
Sec Phone #= N/A Idle Timeout(sec)= 300
Press ENTER to Confirm or ESC to Cancel:
•
The
Call Direction
should be set to ‘Incoming’.
•
Make sure the remote node is enabled by setting
Active
to ‘Yes’.
•
Rem Login
and
Rem Password
is the login information that this Prestige will expect from the
remote router.
•
Route
should be set to ‘None’
•
The
Bridge
field should be set to ‘Yes’.
•
Set
Edit IP/IPX/AppleTalk/Bridge
to ‘Yes’ and press ENTER.
Menu 11.2:
Menu 11.2 - Remote Node Network Layer Options
IP Options: AppleTalk Options:
Rem IP Addr: Dial-On-Query= N/A
Rem Subnet Mask= N/A Rem LAN Net Range= N/A
My WAN Addr= N/A 1st Zone Name= N/A
Metric= N/A 2nd Zone Name= N/A
Private= N/A My WAN Net #= N/A
RIP= N/A My WAN Node ID= N/A
IPX Options: Metric= N/A
Dial-On-Query= N/A ZIP Timeout(min)= N/A
Rem LAN Net #= N/A
My WAN Net #= N/A Bridge Options:
Hop Count= N/A Dial-On-Broadcast= No
Tick Count= N/A Ethernet Addr Timeout(min)= 0
W/D Spoofing(min)= N/A
SAP/RIP Timeout(min)= N/A
Enter here to CONFIRM or ESC to CANCEL:
•
Dial-On-Broadcast
should be ‘No’.