ZyXEL Communications, Inc.______________________________________________Prestige Application Notes
BRG00001: 3
Menu 3.5:
Menu 3.5 - Bridge Ethernet Setup
Handle IPX= Client
Press ENTER to Confirm or ESC to Cancel:
•
Set
Handle IPX
to ‘Client’.
Menu 11:
Menu 11 - Remote Node Profile
Rem Node Name= IPX_user Route= None
Active= Yes Bridge= Yes
Call Direction= Outgoing
Edit PPP Options= No
Incoming: Rem IP Addr= N/A
Rem Login= Edit IP/IPX/AppleTalk/Bridge= Yes
Rem Password=
Rem CLID= Telco Option:
Call Back= N/A Transfer Rate= 64K or 56K
Outgoing: Session Options:
My Login= username Input Filter Sets=
My Password= ****** Output Filter Sets=
Pri Phone #= 5551212 Call Filter Sets=
Sec Phone #= Idle Timeout(sec)= 300
Press ENTER to Confirm or ESC to Cancel:
•
The
Call Direction
should be set to ‘Outgoing’.
•
Make sure the remote node is enabled by setting
Active
to ‘Yes’.
•
My Login
and
My Password
is the login information that this Prestige will use to connect to the
remote router.
•
The
Pri Phone #
field should be set to the correct phone number to dial.
•
Route
should be set to ‘None’
•
The
Bridge
field should be set to ‘Yes’.
•
Set
Edit IP/IPX/AppleTalk/Bridge
to ‘Yes’ and press ENTER.
