17
When the authentication method is set as
Open
or
Shared
, you need to select
the
Default Key ID
and then enter the WEP key(s) in the
Key1/2/3/4
option.
When the authentication method is set as
WPA-PSK
or
WPA2-PSK
, you need
to enter the
Shared Key
that must match the Pre-shared key value in the
remote device.
The SSID (Network ID) keeps the default setting of this option to connect the
camera to any access point under the infrastructure network mode. To connect
the camera to a specified access point, set a SSID for the camera in the
SSID
option to correspond with the access point’s ESS-ID. To connect the camera to
an Ad-Hoc wireless workgroup, set the same wireless channel and SSID to
match with the computer’s configuration.
When done, click
Save
.
PPPoE
This sub-menu is used when you use a direct connection via the ADSL modem.
Select the
Enable
option to enable this feature.
To activate PPPoE mode, you should have a PPPoE account from your Internet
service provider. Enter the
User Name
and
Password
(twice). The camera will get
an IP address from the ISP as starting up.
When done, click
Save
.
Filter
This sub-menu is used when you need to control access right in a certain IP
segment or specify the network communication protocol.
To add a designed filter, you should select the data packet access type of the
target and the communication protocol. Enter the
Begin
IP and
End
IP for dedicate
IP range. When done, click
Add
to append an item in your filter list.
When done, click
Save
.
