ZyXEL Communications AMG1302-T10A User Manual Download Page 135

Page: 135 / 332

Chapter 9 Network Address Translation (NAT)

AMG1302-T10A User’s Guide

135

The following table describes the fields in this screen.

9.5 The ALG Screen

Some NAT routers may include a SIP Application Layer Gateway (ALG). A SIP ALG allows SIP calls

to pass through NAT by examining and translating IP addresses embedded in the data stream.

When the Device registers with the SIP register server, the SIP ALG translates the Device’s private

IP address inside the SIP data stream to a public IP address. You do not need to use STUN or an

outbound proxy if your Device is behind a SIP ALG.

Table 47

Network > NAT > Address Mapping: Edit

LABEL

DESCRIPTION

Type

Choose the port mapping type from one of the following.

One-to-One

: One-to-One mode maps one local IP address to one global IP address. Note

that port numbers do not change for One-to-one NAT mapping type.

Many-to-One

: Many-to-One mode maps multiple local IP addresses to one global IP

address. This is equivalent to SUA (i.e., PAT, port address translation), ZyXEL's Single User

Account feature that previous ZyXEL routers supported only.

Many-to-Many Overload

: Many-to-Many Overload mode maps multiple local IP

addresses to shared global IP addresses.

Many-to-Many No Overload

: Many-to-Many No Overload mode maps each local IP

address to unique global IP addresses.

Server

: This type allows you to specify inside servers of different services behind the NAT

to be accessible to the outside world.

Local Start IP

Address

This is the starting local IP address (ILA). Local IP addresses are

N/A

for

Server

port

mapping.

Local End IP

Address

This is the end local IP address (ILA). If your rule is for all local IP addresses, then enter

0.0.0.0 as the

Local Start IP

address and 255.255.255.255 as the

Local End IP

address.

This field is

N/A

for

One-to-One

and

Server

mapping types.

Global Start IP

Address

This is the starting global IP address (IGA). Enter 0.0.0.0 here if you have a dynamic IP

address from your ISP.

Global End IP

Address

This is the ending global IP address (IGA). This field is

N/A

for

One-to-One

Many-to-

One

and

Server

mapping types.

Server Mapping

Set

Edit Details

Click this link to go to the

Port Forwarding

screen to edit a port forwarding set that you

have selected in the

Server Mapping Set

field.

Back

Click this to return to the previous screen without saving.

Apply

Click this to save your changes.

Cancel

Click this to restore your previously saved settings.

Summary of Contents for AMG1302-T10A













































































































































































































































































































































Search results

Summary of Contents for AMG1302-T10A

Reviews:

Related manuals for AMG1302-T10A

Brands by name

Popular brands

ZyXEL Communications AMG1302-T10A, User Manual

Search results

Summary of Contents for AMG1302-T10A

Reviews:

Related manuals for AMG1302-T10A

Brands by name

Popular brands