ZyXEL AG-320 User’s Guide
66
Chapter 5 Access Point Mode Configuration
Output Power
Set this field if you need to conserve power consumption (especially for notebook
computers). This control changes the strength of the AG-320’s antenna gain or
transmission power. Antenna gain, measured in dBm (decibel relative units
compared to milliwatts), is the increase in coverage. Higher antenna gain improves
the range of the signal for better communications.
Select
High
to set the AG-320’s antenna to transmit at 17-dBm.
Select
Medium-High
to set the AG-320’s antenna to transmit at 15-dBm.
Select
Medium-Low
to set the AG-320’s antenna to transmit at 13-dBm.
Select
Low
to set the AG-320’s antenna to transmit at 11-dBm. This allows for the
least power consumption.
Security Settings
WEP
Select
64 Bits
,
128 Bits
or
256 Bits
to activate WEP encryption and then fill in the
related fields.
Select
Disable
to deactivate the WEP encryption.
Authentication
Type
Select an authentication method. Choices are
Auto
,
Shared Key
and
Open
System
.
Refer to
for more information.
Pass Phrase
When you select the radio button, enter a passphrase of up to 63 case-sensitive
printable characters. As you enter the passphrase, the AG-320 automatically
generates four different WEP key and displays it in the key field below. Refer to
for more information.
At the time of writing, you cannot use passphrase to generate 256-bit WEP keys.
Transmit Key
Select a default WEP key to use for data encryption. The key displays in the field
below.
Key x (where x is a
number between 1
and 4)
Select this option if you want to manually enter the WEP keys.
Enter the WEP key in the field provided.
If you select
64 Bits
in the
WEP
field.
Enter either 10 hexadecimal digits in the range of “A-F”, “a-f” and “0-9” (for
example, 11AA22BB33) for HEX key type
or
Enter 5 ASCII characters (case sensitive) ranging from “a-z”, “A-Z” and “0-9”
(for example, MyKey) for ASCII key type.
If you select
128 Bits
in the
WEP
field,
Enter either 26 hexadecimal digits in the range of “A-F”, “a-f” and “0-9” (for
example, 00112233445566778899AABBCC) for HEX key type
or
Enter 13 ASCII characters (case sensitive) ranging from “a-z”, “A-Z” and “0-9”
(for example, MyKey12345678) for ASCII key type.
If you select
256 Bits
in the
WEP
field,
Enter either 58 hexadecimal digits in the range of "A-F", "a-f" and "0-9" (for
example,
0000111122223333444455556666777788889999AAAABBBBCCCC000011)
for HEX key type
or
Enter 29 ASCII characters (case sensitive) ranging from "a-z", "A-Z" and "0-9"
(for example, MyKey111122223333444455556678) for ASCII key type.
Note:
The values for the WEP keys must be set up exactly the
same on all wireless devices in the same wireless LAN.
ASCII WEP keys are case sensitive.
Table 19
Access Point Mode: Configuration (continued)
LABEL
DESCRIPTION
Summary of Contents for AG-320
