background image

4.  When setting two conflicting SNMP access hosts, the more general one overrides the more 

specific one. 

5.  TCP session will be lost if attacking by hacker. 
6.  The AAM1008 EMS, windows edition, V1.10 might not be used to configure the setting regarding 

the following features supported in this f/w version. 
a.  MAC count filter 
b. IGMP 

snooping 

c.  Set date time 

7.  The web interface doesn’t support the setting regarding the following features supported in this f/w 

version. 
a.  Set date time  

8.  CLI - “vlan1q config reset” not support 
9.  The subnet mask may not work when not setting the IP of gateway and the device in the same 

subnet. 

10.  802.1X constraint:  

a.   EAPOL frames transmitted by a PAE shall not be VLAN tagged according to IEEE 802.1X 

standard. The 802.1X implementation of AAM1008-61 doesn’t support priority-tagging 
EAPOL frames also. 

b.  The PAE must associate itself with the super channel in a port. 

 

Limit of Settings: 

1. 

802.1Q 

VLAN: 

   400 

2. 

Bridge mac filter entry/per port: 

 

3. 

Bridge dynamic mac count:   

 

4096 

4. 

Bridge static mac count: 

 

 

5. 

IGMP snooping multicast group: 

 

256 

6. 

Line profile: 

 

 

 

xdsl port number * 2 (including default profiles) 

7. 

VC 

profile: 

    xdsl 

port 

number 

(including 

default 

profiles) 

8. 

VC 

channel/per 

port:   8 

9. 

Secured 

host: 

   10 

10.  DHCP server supported by Relay Agent: 

10 

11.  Static route: 

 

 

 

unlimited (In fact, it is limited by memory) 

12. 

SNMP 

access 

list: 

   10 

13. 

SNMP 

trap 

list: 

   10 

 

Bug Fix:

 

1.  CPU port may receive packets not belonging to the Management VLAN under certain condition. 
2.  Packets transmitted out from CPU port may forward to all ports not joining the Management 

VLAN. 

3.  Enabling fast mode of bridge may lead to system crash. 
4.  Issuing the command of "config save" continuously may lead to system crash. 
5.  When using SNMP manager to set adslLineConfProfile attribute of one adsl port, system may 

reboot because of an error of "address exception". 

6.  Enhance security of web configurator for internal file protection. 
 

Change History:

 

V2.05(DN.2)C0 (05/24/2005) 

 

This firmware is modified from V2.05(DN.1)C0 

 

IGMP snooping can distinguish multiple users joining the same multicast group in a port. 

 
V2.05(DN.1)C0 (07/29/2004) 

 

This firmware is modified from V2.05(DN.0)C0 

 

Add Dying-Gasp event to unix syslog 

 

Add the constraint of minimum length of 3 on the SNMP community string. (For length  

less than 3, please correct the corresponding script in init file manually.) 

Summary of Contents for AAM1008-61











Reviews: