7
Power I/O Port
1
Ground (black wire). Connect this cable to vehicles chassis ground.
2
- Reverse status (orange wire). Connect this cable to reverse gear to see
the image of rear view camera image on front monitor.
- Keep the cable grounded if the reverse mode is not enabled.
3
+12 ~ 24 V DC input (yellow wire). Connect this cable to (+) pole of the
battery
4
-Parking status (green wire). Connect this cable to handbrake switch of
your vehicle.
- Keep the cable floating if the parking mode is not enabled.
5
ACC (red wire). Connect this cable to ACC ignition of your vehicle.
6
IR (Infrared) LED power. Power for the LED of the IR receiver.
7
+12V output to turn on active antennas or amplifier.
8
IR (Infrared) data input. Infrared data of the IR receiver.
9
IR (Infrared) power. Power of IR LED.
10 IR ground. Ground for IR LED.
I/O Ports Definition
Summary of Contents for Z-CARTV-HD-IQ
Page 1: ...Owner s Manual...
