Zycoo X10, User Manual

Page: 5 / 22

IP SIP Paging Gateway User Guide | ZYCOO Co., Ltd.
2
Basic Settings
Web Interface Login
By default, the SIP paging gateway devices’ IP assignment has been configured as DHCP. Please ensure there’s
DHCP server available in the LAN where the SIP paging gateway devices are installed. If there’s no DHCP
server available or DHCP fails, you’ll have to use the failover IP address 192.168.1.101 to access the web
management interface. Press and hold the VOL+ and VOL- at the same time for 5 seconds, the device will
announce its IP address. Input the IP address in the browser address bar to open the web management
interface of the SIP paging gateway. The login screen is shown as below image.
Use the default login credentials to login to the web management interface.
Default username: admin
Default password: admin
For the safety of the SIP paging gateway, it is recommended to change the default password on first login,
please go to Settings -> Change Password page to change the password.