Notice:
Use this way to recovery system when the system cannot be
started or in abnormal situation
4 Further Configuration
Thank you for the purchase of ZYCOO products. The above steps
introduce simple configuration for IP Office for SOHO. For further
configuration, please refer to the user manual. If you have other
questions, please contact the local dealer or distributor from
which you purchased this product.
You can also browse our online FAQ resource at the ZYCOO Web site
first to check if it could solve your issue. If you need more support,
please contact ZYCOO support team.
ZYCOO online FAQ:
www.zycoo.com/html/Knowledge_Base.html
Support team email address:
[email protected]
Copyright © ZYCOO Co., Ltd. 2014 All Rights Reserved
3.4 Reset to factory
Recovery configuration files
When a system failure occurs, you can reset the system to factory
default by pressing the turbo button for 5 seconds only.
Recovery whole system
Press the "turbo" button for 5 seconds when the device is power
on, the system will be in recovery mode to be restored.
Step 4
: Go to
PBX Extensions Outbound Route DialPlans
Configure DialPlan
Select PSTN into DialPlan1, then the extension number 810 can call
external phones with dial plan1.
Place this call through
：
Choose the FXO trunk
Custom Pattern
：
Define dial rule(XXX. represents any 4-digit or
more than 4
-
digits' numbers; because the default
extension number is 3 digits, such dial rule cannot
conflict with extension number)
Create a dial rule which can call to external phones via a specified
FXO trunk
Notice
: Please back up the configuration file before reset.
15
14