Zycoo IAS-L100, Manual, Page: 21 / 36

IP Audio Center User Guide | ZYCOO Co., Ltd.
19
•
Name: A name to identify this outbound rule.
•
Trunk: Select a trunk to be associated with this outbound rule.
•
Pattern: Dial Patterns act like a filter for matching numbers dialed with trunks. The various patterns
you can enter are as below:
X — Refers to any digit between 0 and 9
N — Refers to any digit between 2 and 9
Z — Any digit that is not zero. (E.g.1to9)
. — Wildcard. Match any number of anything. Must match *something*.
•
Strip Digits: Number of digits to be deleted in the front of a dialed number before sending it to the
trunk.
•
Prefix: Add a given prefix in front of the number before sending it to the trunk.
•
Suffix: Add a given suffix in the end of the number before sending it to the trunk.
Inbound Rules
The inbound phone calls from the SIP/IMS trunks to the IP Audio Center can be routed to specific IP
phone or to digital receptionist. It is controlled by the inbound rules.
Go to Telephony -> Inbound Rules screen, click Add button to add an inbound rule.
DID number: Use the corresponding DID number of a trunk here to configure inbound rule for that
trunk.
Goto: You can choose to send the inbound calls to IP phone, Paging Group, digital receptionist by
selecting or trigger tasks from the 4 types here.
Destination: According to the destination type you have selected, you can select the actual IP phone or
digital receptionist as the calling destination here.