ZYCOD ZX50, User Manual

Page: 15 / 61

ZX50 ZX50 ZX50 ZX50 Series Series Series Series IP IP IP IP PBX PBX PBX PBX
V1.1 Editor:Yu 4
th
,June,2010 14
A DialPlan is comprised of the following items:
� Rule Name Set a rule name
� Place this call through Select a Trunk through which the call should be made
� Failover Select a trunk Failover
� PIN Set Set a password when you dial base the Dial rule.
� Dialing Rules The Dialing Rule gives you the ability to use basic pattern
matching to differentiate calls and route them accordingly. For instance, if a number
begins with 9256 followed by 7 or more digits, that would define a call within the state
of Alabama. If a call began with 9 followed by 7 digits, it would be a local call that
probably didn’t require a long distance charge. Instead of adding a rule for every
extension or phone number you call, specify the pattern in this rule similar to the
example.
�
Define a custom pattern Set a custom pattern by yourself.
N
N N
N Any digit from 2 to 9
Z
Z Z
Z Any digit from 1 to 9
X
X X
X Any digit from 0 to 9
.... Any number of additional digits
Example: “_9ZNXXX.” mean first number is 9, second number is any digit from 1 to
9, third number is any digit from 2 to 9 and each “X” is any digit from 0 to 9. The “.” is
more.
�
Delete This option gives you the opportunity to remove specified digits from the
call being dialed and replace them with the digits needed to make the call. You can
also prepend digits to the beginning.