process for each character in the desired Network Name. A Network Name can consist up
to 16 characters.
Back to Main
- Select Back to Main to escape the RF Setup Menu.
Encoder Setup Menu
Select Encoder
- Use the OK button to enter the Select Encoder Menu. Using the Scroll
Up/Down buttons select the encoder you wish to program. Use the OK button to set the
Encoder. Select Encoder 1, 2, 3, or 4 based on your model number.
Once Selected the Display will indicate which Encoder you are programming while in the
setup function
Video Input –
The Video Input is
default HDMI.
Program Num - U
se the Scroll Up/Down button to set 1 Program Num(Number). Press
the OK button to enter the Program Num menu. Use the Scroll Up/Down to select Program
Num ranging from 1 to 65534 then press OK to set.
Channel Name
– Use the Scroll Up/Down button to select Channel Name. Press the OK
button to enter the Channel Name menu. Use the Scroll Up/Down menu to select the >irst
character of the desired Channel Name then press the OK button to set. Repeat the process
until the Channel Name is completed.
The Channel Name can be 7 characters long. Factory Default: CHANNEL-1.
PROVIDER NAME
– Use the Scroll Up/Down button to select Provider Name. Press the OK
button to enter the Provider Name menu. Use the Scroll Up/Down menu to select the >irst
character of the desired Provider Name then press the OK button to set. Repeat the process
until the Provider Name is completed. The Provider Name can be 16 characters long.
LCN
-Use the Scroll Up/Down button to set LCN. Press the OK button to enter The Source ID
menu. Use the Scroll Up/Down to set the Source ID. Range: 1 to 999. Press OK to set.
Factory default : 101.
HDCP
- Use the Scroll Up/Down button to select the HDCP menu- Use the Scroll Up/Down
button to select the HDCP menu. Press the OK button to enter the HDCP menu. Select
Enable / Disable, and press OK to set.
NOTE:
It is the installers / property owner / integrator's responsibility to contract with the
service provider regarding content authorization and the use of HDCP.
Audio Output
– Use the Scroll Up/Down button to select Audio Output. Press the OK
button to enter the Audio Output menu. Use the Scroll Up/Down button to select the Audio
Output option: MP2(MPEG1 Layer2 Audio), AAC. Factory default: MP2. Press the OK button
to set.
Back to Main
- Select Back to Main to escape the Encoder Setup Menu.
16
HD-4797 Manual V1.0
SELECT ENCODER
1
1
