Modulator Configura#on via Front Panel LCD
Once the encoder is powered up it will go through its initial booting process. Once the unit has completed
its initial “Booting” up process the LCD will display IN-1..., Bit Rate information, Channel-1...., and other
information in the LCD Display Window. When visible the unit is ready for programming or operation.
The LCD will display data as it cycles through the available information.
Screen Views:
1: Inputs, Mbps, Channel Names, Video Output Type, Audio Output type
Note: The device is a QUAD version and the below screen will display all input data as is cycles through
the data available.
2: Use the Scroll Up/Down button to display RF-1 / RF-2 data, Physical Output Channel, Constellation,
FEC setting, OFDM Mode Selection.
3: Use the Scroll Up/Down button to display IP address
Main Menu
– To access the Main Menu >irst enter the password by pressing the OK button. Use the Scroll
Up/Down buttons to enter the password. Once the password is entered press the OK button again and the
LCD Screen will display “Main Menu Common Setup”.
Password
– Use the Scroll Up/Down buttons to enter the password. Password is
0000
. Press the OK
button for each number to enter the password. Press OK again after the display shows …... HD Series.
14
HD-4797 Manual V1.0
IN-1 10.127Mbps CHANNEL-1 H.264 MP2
IN-2 10.741Mbps CHANNEL-2 H.264 MP2
39 (606.5 MHz) QAM 64 7/8 1/32 8K
40 (613.5 MHz) QAM 64 7/8 1/32 8K
NETWORK FIXED IP 192.168. 1. 9
SM 255.255.255. 0 GW 0. 0. 0. 0
PASSWORD=?
0
