24
EN
3
Filling in coffee
Used ground coffee
Fill the ground coffee into the filter. Close the
filter lid.
Grinding coffee beans with the
ZWILLING Enfinigy coffee grinder
Remove the filter holder with the filter from the
coffee machine and hold it under the outlet of
the coffee grinder. Distribute the ground pow-
der in the filter by shaking it carefully. Insert the
filter holder into the coffee machine until it locks
into place with a click. Close the filter lid.
4
Brewing coffee
Turn the button to the right until the
icon flashes. Press the button.
• Without blooming, the brewing process will start immediately, and the
icon will flash.
• With blooming, you need to turn the button to select the number of cups to be brewed. Press the
button again. The
icon will flash, and the coffee machine will moisten the powder with the
right amount of water before the brewing starts.
As soon as the water tank is empty, the brewing unit will switch off and the
icon will appear
continually. The hotplate will remain hot for another 30 minutes. After 30 minutes, the coffee ma-
chine will switch off automatically. Press the button if you want to switch off the appliance earlier.
Risk of scalding! The coffee, the glass jug and the hotplate are hot during and after the
brewing process. Only hold the glass jug by the handle and handle it with care. Do not
touch the hotplate. The heating element surface is subject to residual heat after use.
The valve under the filter holder will only open if the closed glass jug has been placed
at the centre under the filter holder. Caution: If the jug is not inserted correctly or not at
all, the filter might spill over.
Operation
