IC information
IC : 12524A-NNC014
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired operation of the device.
Warnings
- Do not modify the unit in any way.
- Risk of fire.
- Risk of electrical shock.
- Risk of burns.
- This unit never got qualified certificate to supply power for medical instrument or
any life support equipment.
- Do not dispose of electrical appliances and unsorted municipal waste, use
separate collection facilities. Contact your local government for information
regarding the collection systems available.
- There are no user serviceable parts in this unit.
ONE-YEAR LIMITED WARRANTY: Remotec warrants this product to be free from
defects in materials and workmanship under normal use and service for a period of
one year from the original date of purchase from the distributor or dealer.
REMOTEC shall not be liable for:
- Damages caused by defective devices for indirect, incidental, special,
consequential or punitive damages, including, inter alia, loss of profits, savings,
data, loss of benefits, claims by third parties and any property damage or
personal injuries arising from or related to the use of the device.
- Service trips to provide instruction on product use.
- Shipping costs for replacement products.
This warranty is limited to the repair or replacement of this product only, if the
purchase date cannot be substantiated, the warranty period will begin on the date
of manufacture as indicated on this product. All warranty claims must be made to
Remotec appointed distributors or dealers during the applicable warranty period.
This warranty gives you specific legal right and you may also have other rights
which vary in each country. Please contact Customer Service at:
Remotec Technology Limited
E-mail: [email protected]
http://www.remotec.com.hk
Warranty
Maintenance
1. Do not expose your unit to dust, strong sunlight, humidity, high temperatures or
mechanical shocks.
2. Do not use corrosive or abrasive cleansers on your unit.
3. Keep the unit dust free by wiping it with a soft, dry cloth.
4. Do not disassemble your unit; it contains no user-serviceable parts.
Technical Specifications
Note: Specifications subject to change without notice due to continuing product improvement
Certifications
UL Listed:
This power unit is intended to be correctly orientated in a vertical or floor mount
position.
FCC Information
FCC ID : 2ADPENNC014
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Note:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Notice: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user authority to operate the equipment.
Model no.
RF frequency
Input voltage / frequency
BW8140US (ZRP-100NA)
908.42MHz
120Vac / 60Hz
RF operating distance
up to 30m (line of sight between the Wireless Controller
and the closest Z-Wave receiver module at open area.)
Dimension (L x W x T)
Weight
Storage Temperature
64 x 48 x 23mm
50g
o
-10~60 C
Operation Temperature
o
0~40 C
Relative Humidity
Environment
5~95%
Indoor use only
F820-8140-0000
Printed in China
Input power and current
0.5W / 12mA @ 120Vac
