Zakład Wytwórczy Aparatów Elektrycznych Sp. z o.o.
4
1. TRANSPORT
1.1. Unpacking and inspection
Immediately after receiving the disconnector one should check the delivery compliance with the packing list.
Then should be checked whether the disconnector has not been mechanically damaged during transport and
the data on the nameplate match the order.
1.2. Storage and transport
Disconnector poles are transported in assembled condition (ONIII-72, ONIII-123, ONIII-145, ONIII-172) or
partially assembled condition (ONIII-245, ONIII-363). During unloading and installation process, the discon-
nector poles should be lifted using transport belts, placed in the manner shown in the following graphics.
During transport, disconnector poles are placed on wooden beams, which should be removed immediately
before placing the pole on the supporting structure. For this purpose 4 screws should be unscrewed using a
wrench size 13.
