Gateway: (Default 192.168.0.1)
This function can setup MATRIX host intranet “Gateway”, press ENTER, the left-most number of second row will flash, then press the UP or DOWN button to
change the numbers, , press LEFT or RIGHT to move to another location, the move to a position number will flash, press ENTER to complete the setting.
DHCP Client: (Default Disable)
When DHCP Clients setup to “Enable”, the MATRIX host will automatically get IP Address, Subnet Mask, Gateway, if setup as “Disable”, the MATRIX Host IP
Address needs to go through “ ETHERNET” menu to set IP Address, Subnet Mask, Gateway, press ENTER, the second row will flash, then press the UP or
DOWN to select DISABLE, ENABLE, then press ENTER to complete the setting.
NOTE: If you set up as DHCP MAHCL4X4V2 Version up to (1.13 ) will
note show the IP address. You will need to go into your router to confirm exact IP address that was assigned or use our IP Finder.exe tool to know
what IP was assigned by your router.
Media Type: (Default AUTO)
This function can setup MATRIX host intranet “Media Type, press the ENTER, the second row will flash, then press the UP or DOWN button to select AUTO
、
10MHalf
、
10MFull
、
100MHalf
、
100MFull, press ENTER to complete the setting.
MAC Filter: (Default Disable)
MAC Filter can setup with registered MAC Address in order to connect the MATRIX host Web UI. MAC Address is required by the Web page to fill in, this
function can only be setup as “DISABLE”, “ENABLE”, then press ENTER, the second row will flash, then press the UP or DOWN to select DISABLE, ENABLE,
then press ENTER to complete the setting.
4.8 EDID: (Default: 1080P LPCM-2CH)
Because the player output display resolution will be based on TV EDID, the Matrix provides two default EDID modes:” BUILD-IN MODE” and “COPY MODE”.
NOTE: 4K2K resolution you have to copy the EDID from your 4K2K monitor.
Gateway
192.168. 0. 100
DHCP Client
Disable
Media Type
AUTO
MAC FILTER
DISABLE
BUILD-IN MODE
COPY MODE