ZURN Z6140 Installation, Operation, Maintenance And Parts Manual Download Page 5

Aquaflush

Flush V

alves

Parts Identification

1. Optional 1" Metal Push Button
2. Optional 3" Metal Push Button
3. Handle
4. Actuator Rod
5. Handle O-Ring
6. Handle Spring
7. Handle Seal Retainer
8. Handle Seal
9. Gasket

10. Valve Body Cover
11. Plastic Cover
12. Trip Mechanism
13. Retainer Disk
14. Diaphragm
15. Flow Ring
16. Guide Ring
17. Cylinder Slide
18. Valve Body
19. Vacuum Breaker Friction Washer
20. Vacuum Breaker Insert
21. Vacuum Breaker Duckbill
22. Vacuum Breaker Tube
23. Vacuum Breaker Tube Nut
24. Coupling Nut
25. Spud Friction Washer
26. Spud Rubber Gasket
27. 90° Elbow
28. Tailpiece
29. Snap Ring
30. Tailpiece O-Ring
31. Locking Nut
32. Stop Body
33. Piston Seal
34. Piston
35. Stop Spring
36. Guide O-Ring
37. Piston Guide
38. Guide Holder
39. Adjusting Screw
40. Stop Cap
41. Wheel Handle
42. Wheel Handle Screw

Covers and Repair Kits

Product No.

Outside Cover - RB – Item 10

P6000-LL-RB

Inside Cover – Item 11

P6000-L

Low Consumption Closet Kit – 1.6 gal. flush

P6000-ECR-WS1

Water Saving Closet Kit – 3.5 gal. flush

P6000-ECR-WS

Full Flow Closet Kit – 4.5 gal. flush

P6000-ECR-FF

Low Consumption Urinal Kit – 1.0 gal. flush

P6000-EUR-WS1

Water Saving Urinal Kit – 1.5 gal. flush

P6000-EUR-WS

Full Flush Urinal Kit – 3.0 gal. flush

P6000-EUR-FF

Control Stop Repair Kit and Parts

Product No.

Control Stop Repair Kit for 1" and 

3

4

",

Includes Items 33-39

P6000-D-SD

Seal Seat for 1" and 

3

4

", Includes Item 33

P6000-D42

Sweat Solder Connection

P6000-YBA

Adjustable Tailpieces

Product No.

Adjustable Tailpiece for Standard Flush Valve,
Includes Items 28-31

P6000-J1-RB

Tailpiece Locking Ring, Includes Item 29

P6000-C30

Tailpiece O-Ring, Includes Item 30

P6000-C31

Coupling Nut, Includes Item 31

P6000-C32-RB

Flush Connections and Spud Coupling Kits

Product No.

Flush Tube Assembly for Concealed Flush Valves
Refer to Section Q in Aquaparts Guide.

P6000-Q _ _-

Specify ‘L’ Dim. and valve used.

Vacuum Breaker Repair Kit, Includes Items 19-21

P6000-B

Spud Coupling Assembly, Includes Items 56-58
Specify size.

P6000-HN

Repair Parts – Inside Parts

Product No.

Urinal Relief Valve – Item 12

P6000-EU13

Closet Relief Valve – Item 12

P6000-EC13

Handle Assembly and Repair Kits

Product No.

Concealed Valve Actuator

P6000-N-

(Spec. Type and ‘L’ Dim.)

P6000-NL-
P6000-NL3-

Handle Repair Kit (Side), Includes Items 4-9

P6000-NK

Handle Seal, Includes Item 8

P6000-M9

Handle Gasket, Includes Item 9

P6000-M10

Aquaflush Rebuild Kits

Product No.

P6000-ECR-WS-RK

Closet and Urinal Rebuild Kits,

P6000-ECR-WS1-RK

Includes Items 4-9, 12-17, 19-21, 30

P6000-EUR-WS-RK
P6000-EUR-WS1-RK

Aquaflush

Repair Kits

43. Solid Gasket
44. Solid Handle Nut
45. Flanged/Scored Horizontal Tube
46. P30 Flat Gasket
47. Wall Escutcheon
48. Sleeve/Socket
49. Adjusting Nut
50. Optional Bell Nut
51. Handle Nut
52. Push Rod/Filler Rod
53. Spud Nut
54. 3/4" 90° Elbow
55. 3/4" Horizontal Tube
56. 3/4" Spud Nut
57. Spud Friction Washer
58. Spud Rubber Gasket

FV251 Page 5

Summary of Contents for Z6140







Reviews: