FV658 Rev. A 7/27/2018
Page 10
P Trap Installation & Water
Supply Connection to Faucet
Adjust the tail piece base on drain outlet on the wall.
8
Connect the tail
piece to Grid Drain
(threaded connection)
Then attach P-Trap to
tailpiece
Shroud Installation:
Step 1
•
Align wall bracket as shown and install coarse screw on each side. Mark the slots in the wall bracket on the wall.
(Note: Anchors and bolts location can be flexible base on on-site wall studs location)
(Note: A minimum of one anchor next to each pivot point is required to prevent excessive flexing when shroud is in fully
open position)
13
13
Pivot Point
Pivot Point
