FV696 Rev. B 07/29/20
Page 1
Overview:
Zurn’s exposed, hardwired automatic sensor flush valve for retrofit and new construction, and designed for modern commercial
restrooms. Zurn smart and connected flush valve systems for water closets and urinals are performance-engineered delivering
a superior user experience in both form and function.
Important Safety Information:
• Do not convert or modify this Zurn product. All warranties will be voided.
• All electrical wiring is to be installed in accordance with national/local codes and regulations.
• All plumbing is to be installed in accordance with applicable codes and regulations.
• Water supply lines must be sized to provide an adequate volume of water for each fixture.
• Flush all water lines prior to making connections.
• Do not use pipe sealant or plumbing grease on any fitting other than the control stop inlet.
• Sensor units should not be located across from each other or in close proximity to highly reflective surfaces.
• Control stop should never be opened to allow flow greater than fixture is capable of evacuating. In the event of valve failure,
fixture must be able to handle a continuous flow.
• Be certain power is off to prevent damage to electrical components and/or personal injury.
Features:
•
Zurn’s AquaVantage
®
TPE Diaphragm
Clog-resistant triple-filter or linear filter by-pass
Chloramine resistant
Dual seal
•
Zurn’s MetroVantage
®
Piston
Clog-resistant by-pass
Chloramine resistant
•
Proprietary dezincification-resistant low lead brass alloy
•
Actuator
ZEMS 6 VDC motorized actuator
•
Automatic sensor
Fully configurable sensor range adjustment
48 or 168 hour trap seal flush
Capacitive sensing push button override
• Control stop
Internal siphon-guard protection
Sweat solder kit
Cast wall flange with set screw
•
Vacuum breaker
High back pressure
One piece hex coupling nut
• Internal seals
•
Adjustable tailpiece
•
Spud coupling and flange for top spud connection
•
Wireless monitor (flush count & water usage)
Specifications:
Sensor Range:
12” to 60” (adjustable)
Power Type:
Hardwired
Voltage:
6VDC
Operating Water Pressure:
25 psi [172 kPa] (Running); 80 Psi [552 kPa] Max (Static); note: Installations with running pressure below
recommended may void warranty. Higher running pressure may be required for some fixtures. Consult fixture
manufacturer for details.
Operating Temperature:
35°F to 104°F [2°C to 40°C]
