FV740 Rev. C 04/06/21
Page 5
6. Ensure that sink is clear of tools/debris and is in normal
operating condition, and remove protective film from sensor lens
has been removed.
7. Turn on water supply(ies).
• Do not use any abrasive or chemical cleaners to clean the faucets.
•
If abrasives or chemicals are used it can lead to dulling of luster, attacking of chrome plating or decorative finishes.
• ONLY use mildly warm soapy water, and then wipe the device dry with a clean/soft towel or cloth.
•
Upon cleaning other areas of the restroom be sure the sensor lenses are protected from other cleaning chemicals/solvents to prevent
potential damages to the sensor and/or electronics.
Care and Cleaning Instructions
5.c.
MJ unit (sold separately)
Note: Do not connect more than 3 boxes to a single transformer
-MJ
-HW6
18 AWG (MIN)
MAX LENGTH 40’
