PHIX
®
Cartridge System
Owners Manual
19
Returned Goods
Standard cataloged material may be returned only with written permission of Zurn. Returned goods are
subject to a 25% restocking charge of total saleable material returned, plus cost of reconditioning, if
necessary, to make material sellable. Transportation charges are the responsibility of the Buyer. Credit
allowance will be in the form of merchandise credit only
– not cash credit. The value of the return must total at least $100.00 to qualify for credit allowance.
No credit will be allowed for parts unless originally ordered and invoiced as parts. No credit will be
allowed for discontinued or made-to- order items. Items that have been specially made are not subject
to return or cancellation except by special negotiation. Material must be returned within one year of
invoice date for credit to be issued for Chemical Drainage, Linear Drainage, and Light Commercial.
Material must be returned within two years of invoice date for credit to be issued for Commercial
Fixtures, Flush Valve Products, Specification Drainage, Tubular Brass, and Zurn Wilkins. No credit
is allowed for Linear Drainage products that have been cut and Specification Drainage product with
auxiliary tappings. Flush Valve material over two years old will be subject to a 50% handling charge.
Flush Valve material over five years old will not be accepted. Light Commercial and Specification
Drainage galvanized material will be credited at value of Dura-Coated cast iron, and chrome plated at
value of bronze. Zurn Wilkins damaged/broken test cocks or ball valves are not considered defective.
Illustrations of Typical Installations
The typical installations for various products found in each product section are intended to illustrate
the products and potential options for the use of these products. Under no circumstances are they to
be construed as recommended installation procedures. Consult local codes and project specifications
for proper installation instructions.
Shortage/Damage Claims
Notification of material shortages or incorrect filling of orders must be made to Zurn within 10 days
of receipt. No claims over three months old will be honored. Buyer agrees to make all complaints
for damage in transit or "short count" directly to the carrier; before the contents are unloaded have
the carrier agent’s acknowledgment of such damage noted on the bill of lading and to present to
the carrier its agent’s acknowledgment of such damaged material with formal claim covering said
damage.
General
Zurn reserves the right to make changes in design or equipment of any item or product without
incurring any obligation on previously sold items, and to discontinue items at any time, without notice.
Possession of this Catalog or other sales literature is not to be construed as an offer to sell. All orders
are subject to acceptance by Zurn . Catalog printed in U.S.A.
Zurn flush valves are designed to comply with Army Corp of Engineers and Naval guide specifications,
Military Specification MIL.V.29193 and Federal Specification WWP541.
Zurn flush valves comply with the following standards: ASME A112.18.1/CSA B125.1, A112.19.5,
A112.19.2, A112.19.6, ASSE 1037 and 101 are listed by the following agencies: Canadian Standards,
IAPMO/UPC/CUPC, and CSA 125.3. Zurn flush valves are manufactured from dezincification resistant
alloys. For additional compliances, contact Zurn Industries, LLC, Commercial Brass Operation, or
1-800-997-3876.
Zurn is not responsible for typographical errors. The contents of this guide are subject to revision
without notice.
©2015 Zurn Industries, LLC Items in this Guide are covered by Patents and Patents Pending.
Registered Trademarks.
