background image

FV1116  Rev. C   7/19/18

Page 4    

Z6200 Metroflush Valve

 

  Parts Identification

  1.  Cast Wall Escutcheon 

  2.  Setscrew for Cast Wall Escutcheon 

  3.  Supply Cover Tube 

  4.  Sweat Solder Adapter

  5.  Stop Body

  6.  Piston Seal

  7. Piston

  8.  Stop Spring

  9.  Guide O-Ring

 10.  Piston Guide 

 11.  Guide Holder 

 12.  Adjusting Screw 

 13.  Stop Cap

 14.  Snap Cap Screw Cover 

 15.  Vandal-Resistant Control Stop Cover

 16.  Setscrew for Control Stop Cover

 17.  5/64 Allen Wrench

 18.  Locking Nut

 19.  Tailpiece O-Ring

 20.  Snap Ring

 21.  Tailpiece

 22.  Valve Body Cover

 23.  Valve Body Cover Gasket

 24.  Internal Kit

 25.  Main Seat 

 26.  Valve Body

 27.  Handle Gasket

 28.  Handle Seal

 29.  Handle Seal Retainer

 30.  Handle Spring

 31.  Handle O-Ring

 32.  Actuator Rod

 33.  Handle

 34.  Handle Nut

 35.  Vacuum Breaker 

 36.  Vacuum Breaker Tube

 37.  Vacuum Breaker Tube Nut 

 38.  Spud Nut

 39.  Spud Friction Washer 

 40.  Spud Sleeve

 41.  Spud Escutcheon

Covers and Repair Kits

Product No.

Outside Cover, Item 22

P6200-LL 

Outside Cover O-Ring, Item 23

P6200-L12

3.5 gpf Closet Repair Kit, Item 24

P6200-EC

1.5 gpf Urinal Repair Kit, Item 24

P6200-EU

1.6 gpf Low Consumption Closet Kit, Item 24 P6200-EC-WS1
1.0 gpf Low Consumption Urinal Kit, Item 24 P6200-EU-WS1

1.28 gpf High Efficiency Closet Kit, Item 24

P6200-EC-HET

0.5 gpf High Efficiency Urinal Kit, Item 24

P6200-EU-EWS

Main Seat, Item 25

P6200-E14

Handle Assembly and Repair Kits

Product No.

ADA Handle Assembly, Items 27-34

P6000-M-ADA

Handle Repair Kit, Items 27-32

P6000-MK

Handle Seal, Item 28

P6000-M9

Handle Gasket, Item 27

P6000-M10

Control Stop Repair Kit and Parts

Product No.

Control Stop Repair Kit for 1” and 3/4”, 

Includes Items 6-12

P6000-D-SD

Seal Seat for 1” and 3/4”, Includes Item 6

P6000-D42

Sweat Solder Adapter, Includes Item 4

P6000-YBA

Vandal-Resistant Cover, Item 15

P6000-VC

Adjustable Tailpieces

Product No.

Adjustable Tailpiece, Items 19-21

P6000-J1

Tailpiece Coupling Assembly, Items 18-20

P6000-K

Tailpiece Locking Ring, Item 20

P6000-C30

Tailpiece O-Ring, Item 19

P6000-C31

Coupling Nut, Item 18

P6000-C32

Summary of Contents for Metroflush Z6200 series






Reviews: