Additional Functions
OBD UPDATER / TROUBLESHOOTING
29
Setting the Unit of Measurement
1.
Use the
DOWN
button, as neces-
sary, to highlight
Unit of Measurement
in the Main Menu, then press the
ENTER
button.
2.
Use the
DOWN
button, as neces-
sary, to highlight the desired unit of
measurement.
3.
When the desired unit of measurement
value is selected, press the
ENTER
button to save your changes and return to
the Main Menu.
Exiting the MENU Mode
Press and hold the
ENTER
button to exit the Menu mode.
OBD UPDATER
Use these procedures to verify your tool’s firmware is current, and to
perform firmware updates when available.
1.
Visit www ZurichDiagnostics.com, download and install the latest
version of OBD Updater.
2.
Connect your tool to your PC using a Mini USB cable and run the
OBD Updater software.
3.
Follow the on-screen prompts to install the firmware update.
If no update is available, the software displays the message
“No updates available.”
TROUBLESHOOTING
Q:
Why can I not erase some codes?
A: Unlike other codes which can be removed from the vehicle’s
control module, PERMANENT codes cannot. This holds true
regardless of the tool being used or color of the status LED display.
PERMANENT codes will automatically erase when the control
module no longer detects the fault that originally caused the code.
Summary of Contents for ZR4
Page 1: ......
Page 33: ...63808 ...
